Summary
For automatic laser marking, NCSK designed customized laser marking machine which can connect with PLC。Custom function including：
1）Extended I/O for PLC communication
2）Communication protocol
3）Software Development Kit(SDK）
2. Extend I/O for PLC communication
PLC need control signal and state signal to control the laser marking machine. So we add these signals in an extended I/O. The extended I/O can be DB15 or DB25, depending on how many signals need to be used.
2.1 General Input Signal
General Input Signals are use for controlling the working state of laser machine。Including：
1）Start Marking Signal：Machine start making when it’s active.
2）Stop Marking Signal：Machine stop marking when it’s active, and show warning information.
3）Safety Door Signal：Machine stop marking when it’s active.
4）File Select Signal：Use input signal to select the right file to marking。For example，INPUT[6:4] ”001” select file A to marking，INPUT[6:4] “010” select file B to marking。
Extended I/O support 8 general input signals，figure 2-2 shows the pin diagram：
2.2 General Output Signal
General output signals show the working state of laser marking machine。
1）Busy Marking：Active when machine is marking
2）Finished Marking：Output an pulse signal when finished marking.
3）Red light indication signal：Active when Red light is indicating。
The output signal is TTL output by default. Short circuit or grounding should be avoided.
3. Communication protocol
In normal laser marking system, you can modify the content of mark by serial port or ethernet port. But you can only modify one content before marking.
So we design a communication protocol.
With this protocol, you can modify any mark any content before laser marking.
Example:
| Instruction code | Mark address | Data | CRC code |
| TR | 01 | NCSK001 | ABF0 |
Intruction code: Code of instruction
Mark address: Define which mark you need to modify
Data: The new content of the mark
CRC code: CRC check code
The procotol also define the feedback massage formate, and other instruction, for detail document, please contact us.
4. Software Development Kit (SDK)
NCSK also supply SDK for secondary development of software. With this SDK, you can integrate the core functions of laser marking software into your own program.
The SDK is suitable for Windows system environment and the development language is C++. Figure 4-1shows a demo program developed by this SDK.
